7204L15J8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7204L15J8 Overview
FIFO memory chip is contained in the PLCC package.The recommended mounting way is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.A total of 32 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 32 pins.There is a maximum current requirement of 120mA for its operation.A supply voltage of 5V is recommended for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.70°C °C is the memory logic's maximum operating temperature that allows stable operation.The gadget in FIFOs is self-contained.The IC of the part is of the type OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.There are a total of 32 pins on this FIFO memory IC.The component normally owns 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .This FIFO memory IC operates at a frequency of 40MHz .
7204L15J8 Features
FIFOs category
Clock frequency of 40MHz
7204L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 7204L15J8 FIFOs Memory applications.
- TVs
- Video time base correction
- Data
- Medical Monitoring Device
- Computers
- Test site
- General Data Collection Applications at Low-Temperatures
- GPS Offender Tracking
- Multimedia
- Data-acquisition systems