601G-01ILF
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 22mA |
| Nominal Supply Current | 30mA |
| Frequency (Max) | 156MHz |
| Input | Clock |
| Primary Clock/Crystal Frequency-Nom | 27MHz |
| Max Duty Cycle | 55 % |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
601G-01ILF Overview
The TSSOP package includes this clock generator. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. 16 terminations can be found in frequency synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. Clock is designed for clock generator's input. Using 1 circuits, the electronic part's full performance can be accessed. The frequency generator has a maximum frequency of 156MHz. It is a 16-bit clock PLL designed specifically for microprocessors. The frequency synthesizer has 16 pins that are available. Featuring an impressive low-temperature operating performance and -40°C functions, this clock generator is sure to impress. The operating temperature should be lower than 85°C. The output frequency can be amplified as high as possible with its 2 signal outputs. To supply this clock PLL, a voltage higher than 5.5V is unacceptable. Clock PLL operates with the minimal supply voltage of 3V. In order for it to fully perform time clock generator's functions, it needs a supply current of 22mA.
601G-01ILF Features
Available in the TSSOP
Supply voltage of 3.3V
601G-01ILF Applications
There are a lot of Integrated Device Technology (IDT) 601G-01ILF Clock Generators applications.
- PMR (Professional Mobile Radio)
- Microwave backhaul IF
- Simple clock clean-up circuits
- Motor speed controls
- Clock recovery
- Tracking filters
- Instrument
- Cable television converter boxes
- Local oscillator source in receiver
- Antenna automatic tracking