54FCT374TDB
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 14 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 11 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -12mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.9mm |
| Length | 25.4mm |
| Width | 7.62mm |
| Thickness | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
54FCT374TDB Overview
The flip flop is packaged in a case of CDIP. Terminations are 20. The power supply voltage is 5V. Devices in the FCTfamily are electronic devices. There is an electronic part mounted in the way of Through Hole. A total of 20pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part with 8bits has been designed. Due to its reliability, this T flip flop is well suited for TUBE. It runs on 5Vvolts of power. A D flip flop with 2embedded ports is available. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It consumes a total of 10μA quiescent current at any given time. High level output current is set to -12mA. Low level output current is set to 32mA. Operating temperatures should be lower than 125°C. In order for the system to operate properly, the temperature should be higher than -55°C. In order for it to operate, a supply voltage of 4.5Vis required. There is a maximum supply voltage of 5.5V. It adopts a logic IC of type BUS DRIVER. It is equipped with 1 Functions . There are 20 pins on the D latch.
54FCT374TDB Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
54FCT374TDB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT374TDB Flip Flops applications.
- Clock pulse
- Bus hold
- Cold spare funcion
- Instrumentation
- Modulo – n – counter
- Memory
- Memory
- Safety Clamp
- Storage registers
- Single Up Count-Control Line