2308B-1DCGI
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Clock Driver |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Family | 2308 |
| Output Characteristics | 3-STATE |
| Input | LVTTL |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| Max I(ol) | 0.008 A |
| Same Edge Skew-Max (tskwd) | 0.4 ns |
| Number of True Outputs | 8 |
| Length | 9.9mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
2308B-1DCGI Overview
In order to package it as a clock IC, the Rail/Tube package is used. Embedded in the SOIC package is this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. 16 terminations can be found in frequency generators. The clock generator ic should be grounded with a voltage of 3.3V. The input of this clock generator is designed to be LVTTL. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133.3MHz. It is a 16-bit IC that is designed for microprocessors specifically. The frequency synthesizer has 16 pins that are available. Electronic frequency generator can operate at low temperatures and can perform -40°C operations at a time. The RF synthesizer can still operate at 85°C with attenuated performance. PLL clock can handle a voltage of 3.3V as its supply voltage. The device is usually classified as a type of Clock Driver device. There is a low timing skew at 0.4 nsmax with this RF synthesizer. 8 high true output enable pins are available on this clock generator. 2308-family clock generators are similar. There is no way that a voltage higher than 3.6V can be supplied to this clock generator. This clock generator ic requires a voltage supply no lower than 3V. Logic circuits that use PLL BASED CLOCK DRIVER logic are composed of this analog clock generator.
2308B-1DCGI Features
Available in the SOIC
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs
2308B-1DCGI Applications
There are a lot of Integrated Device Technology (IDT) 2308B-1DCGI Clock Generators applications.
- Fiber Channel
- Aerospace and defense
- Multi-function printers
- Symbol synchronization
- Test and instrumentation equipment
- Mobile telephones
- Frequency shifting decodes
- DVD recorders
- VSAT (Small Ground Satellite Station)
- Microwave point-to-point systems