XCF32PVOG48C
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.724, 18.40mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | 3A991.B.1 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.32.00.61 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 1.65V~2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCF*P |
| Pin Count | 48 |
| Operating Supply Voltage | 1.8V |
| Supply Voltage-Max (Vsup) | 2V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Programmable Type | In System Programmable |
| Memory Size | 32Mb |
| Supply Current-Max | 0.04mA |
| Organization | 32MX1 |
| Standby Current-Max | 0.001A |
| Memory Density | 33554432 bit |
| Parallel/Serial | SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 20000 Write/Erase Cycles |
| Data Retention Time-Min | 20 |
| Height | 1mm |
| Length | 12.1mm |
| Width | 18.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
XCF32PVOG48C Overview
There is a neat 48-TFSOP (0.724, 18.40mm Width) package that is used in this program.Packaging for Tray.-40°C~85°C license holder.In System Programmable is the program that allows it to be programmed.An electric current of 1.65V~2V is applied to it.This memory device is mounted in Surface Mount.A data storage size of 32Mb is allowed.To find other similar parts, search for "XCF*P".1.8V is the voltage it requires as a supply.With different functions, 48 terminations can be used.As long as the maximum voltage of the memory device is 2V, then the memory device can be used.1.65V must be the minimum voltage supplied to the device.Using CONFIGURATION MEMORY memory chips, this is what you get.If you're reflow soldering, you shouldn't go above 260.There are 48 pins on it.By using SERIAL-processing, data can be transmitted through this memory in a secure manner.A memory chip can operate at a voltage no greater than 0.04mA.Parts come with 48 pins set.To run the part safely and stably in a circuit, 1.8V recommends users apply 1.8V on the part.For applications involving Surface Mount, it is suitable.In specific, it can be described as a form of Flash Memories.
XCF32PVOG48C Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
XCF32PVOG48C Applications
There are a lot of Xilinx Inc. XCF32PVOG48C applications of configuration proms for FPGAs.
- graphics card
- Camcorders
- servers
- networks
- mainframes
- hard disk drive (HDD)
- multimedia computers
- eDRAM
- printers
- main computer memory